fbpx
Category

teardrop banners

Teardrop banner hardware

Choosing hardware for teardrop and feather banners

By | advertising flags, advertising signs, bow flags, feather flags, teardrop banners, teardrop flags
Banner Hardware

Ground Spikes

Ground spikes are the most popular base which allows you to setup your teardrop or feather banner on soft ground surfaces, such as grass, dirt areas, garden beds or in sand at the beach.

Banner Hardware

Cross Base Stand

Also very popular is the Cross Base stand which allows the stand to be setup on hard surfaces such as indoors or outdoors on concrete. Made of very strong cast iron, this base weights 3.8kg and will stand up in windy conditions. This base is much stronger than the folding base on the market and it’s very easy to pack up for transporting. For additional support you can order a donut shape sandbag weight. This sits over the base and holds the base down.

Banner Hardware

Car Base

Another option is the Car Base. This option is holds the teardrop banner in place using a car wheel. You can use this base by driving a front or back wheel over the stand to hold it in place. More popular with real estate agents.

feather banners

What are single and double sided teardrop banners?

By | teardrop banners
Single & Double Sided Banners

Single Sided Teardrop and Feather Banners

On single sided teardrop banners and feather banners we print on one piece of fabric. As a result ink bleeds through to the backside showing a reversed image on this side. The colour printing on the reverse side is slightly less vibrant on this side.

feather banners
Single & Double Sided Banners

Double Sided Feather Banners and Teardrop Banners

We produce double sided teardrop banners and feather banners using three pieces of fabric. The artwork is printed on two pieces of fabric and a third piece of blockout material in sewn in between the printed fabric. This allows the banner to display without light affecting each side of the banner.

teardrop banner stands

Which base do I need for my Teardrop Banner or Feather flag?

By | teardrop banners

Teardrop banners and feather flags can use a different base depending on where you want to set it up. All of our bases are interchangeable so you can use multiple bases for the same teardrop banner if you need to move locations.

Ground spikes

Ground spikes are the most popular base which allows you to setup the teardrop banner on soft ground surfaces, such as grass, dirt areas, garden beds or in sand at the beach.

advertising flags

 

Cross base

Also very popular is the Cross Base stand which allows the stand to be setup on hard surfaces such as indoors or outdoors on concrete. Made of very strong cast iron, this base weights 3.8kg and will stand up in windy conditions. This base is much stronger than the folding base on the market and it’s very easy to pack up for transporting. For additional support you can order a donut shape sandbag weight. This sits over the base and holds the base down.

cross base

Wall Brackets

For a permanent fixture we have Wall Brackets. These can be bolted on to a wall or fence and come with two different angles.
The 0 degree wall bracket holds the teardrop banner straight and the 30 degree wall bracket allows the banner to tilt out on an angle.
All the brackets have the same plate 100mm x 100mm and the holes for the bolts are 70mm apart.

feather flags

Car Base

Another option is the Car Base. This option is holds the teardrop banner in place using a car wheel.  You can use this base by driving a front or back wheel over the stand to hold it in place.

feather flags

All bases are interchangeable and can be used for any size banner small, medium or large..

For more information please contact us.