Teardrop Banner Flags

They are the exact same promotional product! The terms "teardrop banner," "teardrop flag," "teardrop banner flags," and "teardrop signage" are used interchangeably across Australia. They describe an aerodynamic, tear-shaped promotional flag engineered to stay taut, open, and fully readable even when there is absolutely no wind.

We use a premium, commercial-grade knitted polyester fabric specifically engineered for vibrant dye-sublimation printing and outdoor durability.

• Single-Sided Flags: Printed on high-tensile 130g knitted polyester, which allows for a high-clarity mirror-image bleed-through on the reverse side.
• Double-Sided Flags: Printed on high-tensile 130g knitted polyester with block-out material in the middle. We print two separate panels and sew them back-to-back with an internal block-out layer, ensuring no light shadows bleed through and your graphics read perfectly from both directions.

We offer comprehensive sizing to fit any marketing environment, measured from the ground to the absolute top of the flag assembly:

• Small (2.2m): Ideal for general indoor use, shopping centre displays, or low-clearance shopfronts.
• Medium (2.7m): Our most popular choice for outdoor pick. It stands tall enough to be highly visible across crowded weekend markets, pavements, or parking lots.
• Large 3.7m: Perfect for roadside advertising. It easily clears the height of standard parked cars, ensuring your message hits passing motorists.
• Extra Large 4.65m: Best for massive festival grounds, auto dealerships, or sports fields where maximum long-distance visibility is required.

Yes, our flags are explicitly built for rugged outdoor environments. The flag poles are manufactured from high-elasticity, epoxy-composite fibreglass with stainless steel sleeve reinforcements to prevent splitting under pressure. They can comfortably handle steady winds of up to 25–30 km/h when anchored properly. Because dye-sublimation inks are embedded directly into the fabric fibers at high heat, the print will not crack, peel, or wash off in torrential rain. However, during severe storms, high gale warnings, or winds exceeding 35 km/h, we strongly advise bringing them indoors to maximise their lifespan.

• Indoor Use: If used inside a showroom or trade show away from direct weather, our teardrop banners will last indefinitely without fading.
• Standard / Event Use: If set up and packed down into a carry bag for weekend markets or specific daytime activations, you can expect 2 to 3 years of crisp, vibrant service.
• Permanent Outdoor Use: If left exposed to the harsh Australian sun 24/7, UV fabric fading and edge wear will naturally begin to show between 6 to 12 months (this is an industry-standard constraint across all major print manufacturers). Bringing your flags inside at the close of business will easily double their lifespan.

Choosing the right base ensures your flag swivels freely and safely. All of our premium bases feature heavy-duty, fully enclosed ball-bearing spindles allowing the flag to turn effortlessly with the wind direction:

• Ground Spike: A heavy steel spike designed to hammer into grass, dirt, or soft soil. Best for sports fields, parks, and outdoor festivals.
• Cross Base (X-Base) & Water Bag: A universal metal base ideal for hard surfaces like concrete, timber decking, or indoor tile. Optional water-weight bag when using in windy conditions.
• Fixed Wall Brackets (0°, 30°): Heavy-duty brackets that screw permanently into brick or timber shop facades, angling the flag safely over the pavement.

Absolutely. You do not need to buy a whole new hardware kit every time you change your logo or run a new promotion. We sell standalone replacement fabric flags custom-tailored to fit your existing pole system perfectly. Simply select the "Flag Only" option during checkout.

Assembly requires zero tools and takes less than two minutes for a single person.

1. Push-fit the tapered fibreglass pole pieces together from largest to smallest.
2. Slide the fabric flag sleeve smoothly over the top of the pole.
3. Hook the loop at the bottom of the flag onto the integrated adjustable tensioning mechanism at the base of the pole.
4. Drop the entire pole assembly directly onto the ball-bearing spindle of your chosen base.

Yes. To ensure your custom branding looks perfectly cohesive, we offer options for both Black and White pole sleeves. Selecting a white sleeve prevents a harsh black line from cutting through bright, white, or pastel designs, while a black sleeve offers a classic, framed finish for high-contrast branding.